D-Link DWS-1008 Cli Reference Manual page 361

Defaults: By default, a service profile does not have any authorization attributes set.
Access: Enabled.
Usage: To change the value of a default attribute for a service profile, use the set service-
profile attr command and specify a new value.
The SSID default attributes are applied in addition to any attributes supplied for the user by the
RADIUS server or the local database. When the same attribute is specified both as an SSID
default attribute and through AAA, then the attribute supplied by the RADIUS server or the local
database takes precedence over the SSID default attribute. If a location policy is configured,
the location policy rules also take precedence over SSID default attributes. The SSID default
attributes serve as a fallback when neither the AAA process, nor a location policy, provides
them.
For example, a service profile might be configured with the service-type attribute set to 2. If a
user accessing the SSID is authenticated by a RADIUS server, and the RADIUS server returns
the vlan-name attribute set to orange, then that user will have a total of two attributes set:
service-type and vlan-name.
If the service profile is configured with the vlan-name attribute set to blue, and the RADIUS
server returns the vlan-name attribute set to orange, then the attribute from the RADIUS server
takes precedence; the user is placed in the orange VLAN.
You can display the attributes for each connected user and whether they are set through AAA
or through SSID defaults by entering the show sessions network verbose command. You can
display the configured SSID defaults by entering the show service-profile command.
Examples: The following command assigns users accessing the SSID managed by service
profile sp2 to VLAN blue:
DWS-1008# set service-prof sp2 attr vlan-name blue
success: change accepted.
The following command limits the days and times when users accessing the SSID managed
by service profile sp2 can access the network, to 5 p.m. to 2 a.m. every weekday, and all day
Saturday and Sunday:
DWS-1008# set service-prof sp2 attr time-of-day Wk1700-0200,Sa,Su
success: change accepted.
See Also:
• show service-profile
• show sessions network
D-Link DWS-1008 CLI Manual 8