Set Radius Proxy Port - D-Link DWS-1008 Cli Reference Manual

Access: Enabled.
Usage: AAA for third-party AP users has additional configuration requirements.
Examples: The following command configures a RADIUS proxy entry for a third-party AP
RADIUS client at 10.20.20.9, sending RADIUS traffic to the default UDP ports 1812 and 1813 on
the switch:
DWS-1008# set radius proxy client address 10.20.20.9 key radkey1
success: change accepted.
See Also:
• clear radius proxy client
• set authentication proxy

• set radius proxy port

set radius proxy port
Configures the switch port connected to a third-party AP as a RADIUS proxy for the SSID
supported by the AP.
Syntax: set radius proxy port port-list [tag tag-value] ssid ssid-name
port port-list
tag tag-value
ssid ssid-name
Defaults: None.
Access: Enabled.
Usage: AAA for third-party AP users has additional configuration requirements.
Enter a separate command for each SSID, and its tag value, you want the switch to support.
Examples: The following command maps SSID mycorp to packets received on port 3 or 4, using
802.1Q tag value 104:
DWS-1008# set radius proxy port 3-4 tag 104 ssid mycorp
success: change accepted.
See Also:
• clear radius proxy port
• set authentication proxy
• set radius proxy client
D-Link DWS-1008 CLI Manual
Switch port(s) connected to the third-party AP.
802.1Q tag value in packets sent by the third-party AP for the SSID.
SSID supported by the third-party AP.