Brocade Communications Systems Brocade 8/12c User Manual page 798

26
FC troubleshooting
3. Click the right arrow button.
4. Click Start.
5. Select a port row in the Selected Ports table to display the detailed status in the Status Details
754
The Management application performs the following operations to enable diagnostic mode on
the selected ports:
1. Disable the source port.
2. Disable the destination port.
3. Enable the diagnostic mode on source E port.
4. Enable the diagnostic mode on destination E port.
5. Enable the source port.
6. Enable the destination port.
The following tests are performed on the selected ports:
•
Electrical
•
Optical
•
Measure link distance
•
Link traffic
If any of the tests fail, the Management application does not rollback to already executed
operations.
When the test successfully completes, the Management application performs the following
operations to change the port type back to E port:
1. Disable the source port.
2. Disable the destination port.
3. Disable the diagnostic mode on source D port.
4. Disable the diagnostic mode on destination D port.
5. Enable the source port.
6. Enable the destination port.
The Progress column shows whether the test is not started, in progress, or completed.
The Status column shows the overall status (Success or Failed) of the test.
of the Selected Row table.
The Status Details of the Selected Row table displays with the details of the port selected for
diagnosis, the details of the tests performed, the results of the test, as well as short
description of the test results. The following table details the messages that display depending
on the success or failure of the operations and tests.
Brocade Network Advisor SAN User Manual
53-1002167-01