Extreme Networks ExtremeWare XOS Command Reference Manual page 880

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
QoS Commands
Protocol:
Trunking:
EDP:
ELSM:
DLCS:
lbDetect:
Learning:
Unicast Flooding:
Multicast Flooding:
Broadcast Flooding:
Jumbo:
BG QoS monitor: Unsupported
High Priority COS: 7
Packet Length Adjustment: 0 bytes
QoS Profile:
Aggregate Queue:
Queue:
Ingress Rate Shaping :
Ingress IPTOS Examination:
Egress IPTOS Replacement:
Egress 802.1p Replacement:
NetLogin:
NetLogin port mode:
Smart redundancy:
Software redundant port:
Preferred medium:
Example
The following command configures the egress bandwidth on port 2:5 of the BlackDiamond 12804 R-
Series switch as a maximum of 75% of the total bandwidth:
configure ports 2:5 rate-limit egress aggregate maxbw 75
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
The command is available only on the BlackDiamond 10808 and 12804 switch.
880
Load sharing is not enabled.
Enabled
Disabled
Unsupported
Unsupported
Enabled
Enabled
Enabled
Enabled
Disabled
None configured
QP0 MinBw =
QP1 MinBw =
QP2 MinBw =
QP3 MinBw =
QP4 MinBw =
QP5 MinBw =
QP6 MinBw =
QP7 MinBw =
QP8 MinBw =
0% MaxBw = 75%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
0% MaxBw = 100%
Unsupported
Disabled
Disabled
Disabled
Disabled
Port based VLANs
Enabled
Disabled
Fiber
ExtremeWare XOS 11.5 Command Reference Guide
Pri = 8
Pri = 1
Pri = 2
Pri = 3
Pri = 4
Pri = 5
Pri = 6
Pri = 7
Pri = 8