Starter Replacement - Honda S2000 Service Manual

Starting System
Stafter Performance Test {cont'dl
5. Disconnectthe battery from the starter body. lfthe
pinion retracts immediately, it is working properly.
Clamp the starter firmly in a vise.
Connect the starter to the battery as described in
the diagram below, and confirm that the motor
sta rts and keeps rotating.
7 .
lf the electric current and motor speed meet the
specifications when the battery voltage is at 1 1.5 V,
the starter is working properly.
Specifications:
1 .0 kw 90 A or less (Electric current),
3,000 rom or more
4-8
Starter Replacement
' 1 .
Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons.
Disconnect the negative cable from the battery,
then disconnect the positive cable.
Move the auto-tensioner (A) to relieve tension from
the alternator-compressor belt, and remove the
b e l t ( B ) .
4. Remove the auto-tensioner.
&
8 x 1.25 mm
22 N.m (2.2 kgf.m, 16lbf.ftl
8 x 1 . 2 5 m m
22 N m (2.2 kgf.m, 16lbf.ft)