' R e m o v e d u s t a n d f o r e i g n m a t e r i a l f r o m t h e s u r f a c e o f t h e w h e e l a n d d e g r e a s e t h e s u r f a c e b e f o r e

a p p l y i n g t h e n e w

balance weight.

' Use the IPA (isopropyl alcohol) or brake cleaner asthe degreasing agent, and letthe surlace drythoroughly

after

degreasing.

' Peel off the backing from the balance weight with care, do not touch the adhesive surface. Place the balance weight

on the wheel lengthwise to the wheel.

' P r e s s t h e e n t i r e s u r f a c e o f t h e b a l a n c e w e i g h t w i t h 5 t o T k g o f f o r c e s o t h e b a l a n c e w e i g h t ' s t a p e a d h e r e s t o t h e

wheel securely.

. Rock the balance weight lightly and make sure that it is properly secured to the wheel.

. Do not place one balance weight on top of another.

' When you cannot measure the amount of weight at the adhesion position with the wheel ba la nce

machine, ta ke the

amount of unbalance at the outer rim and calculate the amount of weight using the conversion factor betow.

Select the balance weight that is the closest to the calculation.

Conversion factor for the adhesion position: Front wheel: 2.9

R e a r w h e e l : 2 . 5

Example:

lf the unbalance at the front rim is 15 grams, it is calculated as ; 1S x 2.9 = 43.5 gr.

Therefore, the unbalance is 43.5 grams.