Table 113: Show Ip Dhcp-Local Pool Output Fields - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Table 113: show ip dhcp-local pool Output Fields

Field Name
Pool Name
Pool Id
Domain Name
Network
Mask
NETBIOS Node Type
Lease
Grace Period
Grace period for released
leases
DNS Servers
NETBIOS Name Servers
Default Routers
Server Address
Linked Pool
High utilization threshold
Abated utilization threshold
Current utilization
Utilization trap
Shared pool allocations
Group Name
Total Addresses Available
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Name of the DHCP local pool
ID of the pool
Domain name assigned to the pool
Addresses that the DHCP local server can provide from the pool
Subnet mask that goes with the network address
Type of NetBIOS server:
1 = Broadcast
2 = Peer-to-peer
4 = Mixed
8 = Hybrid
Time for which the supplied IP address is valid
Length of grace period
Status of the grace period for released leases; enabled or disabled
Address of each DNS server assigned to the pool
NetBIOS server assigned to subscribers
Address of default router used for subscribers
DHCP server address that is sent to subscribers
Names of any pools that are linked to this pool
Threshold at which the utilization trap is triggered, if the trap is
enabled
Threshold at which the utilization trap is reenabled after the trap
has been triggered
Percentage of local address pool currently used
Status of the utilization trap, which is generated when the high
utilization threshold is reached; enabled or disabled
Number of addresses allocated to shared pools
Group name; based on the name of the original pool
Number of addresses in the group
Monitoring DHCP Local Address Pools
551