Juniper Networks Mib - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual

A J
This appendix provides information on the Juniper Networks Management
Information Base (MIB). The Juniper Networks MIB allows you to send SNMP
traps to other network management systems. The Juniper Networks OID is
1.3.6.1.4.1.20212.
Note: STRM does not support outbound SNMP traps.
For assistance with the Juniper Networks MIB, please contact Juniper Networks
Customer Support.
--
-- Juniper Enterprise Specific MIB: Security Threat Response
Manager (STRM) trap MIB.
--
-- Copyright (c) 2002-2006, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without
notice.
--
IMPORTS
TEXTUAL-CONVENTION
strmTrapInfo MODULE-IDENTITY
N
UNIPER
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress
FROM SNMPv2-SMI
jnxStrm
FROM JUNIPER-SMI
DisplayString, DateAndTime, TruthValue,
FROM SNMPv2-TC;
LAST-UPDATED "200811101100Z"
ORGANIZATION "Juniper Networks, Inc"
STRM Administration Guide
ETWORKS
MIB