Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 490

Complete Software Guide for Junos
386
®
OS for EX Series Ethernet Switches, Release 10.4
on all interfaces, configures Power over Ethernet (PoE) on all interfaces of models that
provide PoE, and enables the LLDP, LLDP-MED, and RSTP protocols and IGMP snooping.
When you commit changes to the configuration, a new configuration file is created that
becomes the active configuration. You can always revert to the factory default
configuration. See "Reverting to the Default Factory Configuration for the EX Series
Switch" on page 415.
The following factory default configuration file is for an EX2200 switch with 24 ports, all
of which have PoE capability:
NOTE: For models that have more than 24 ports, this default configuration
file has more interfaces. For models without PoE, the
appear. All models have four uplink ports as listed below,
ethernet-switching-options {
storm-control {
interface all {
level 50;
}
}
}
protocols {
igmp-snooping {
vlan all;
}
lldp {
interface all;
}
lldp-med {
interface all;
}
rstp;
}
poe {
interface all;
}
interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching;
}
}
poe stanza does not
to
ge-0/1/0 ge-0/1/3
Copyright © 2010, Juniper Networks, Inc.
.