Table 85: Show L2Tp Destination Lockout Output Fields; Monitoring Locked Out Destinations - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Related Topics

Monitoring Locked Out Destinations

Display information about the L2TP destinations that are currently locked out.
Purpose
To display information about the L2TP destinations that are currently locked out:
Action
host1#show l2tp destination lockout
L2TP destination 36 is waiting for lockout timeout (45 seconds remaining)
L2TP destination 54 is waiting for lockout test start
L2TP destination 76 is waiting for lockout test complete
3 L2TP lockout destinations found
Table 85 on page 431 lists the show l2tp destination lockout command output fields.
Meaning

Table 85: show l2tp destination lockout Output Fields

Related Topics
Monitoring Configured Destination Profiles or Host Profiles
Display either a list of configured L2TP destination profiles or the host profiles defined
Purpose
in a particular profile.
If a nondefault L2TP RWS is configured for a particular host profile, the command
displays the RWS setting as an attribute of that host profile. (See Example 2.)
To display either a list of configured L2TP destination profiles or the host profiles
Action
defined in a particular profile:
host1#show l2tp destination profile
L2TP destination profile westford
1 L2TP destination profile found
show l2tp destination
Field Name
L2TP destination waiting
L2TP lockout destinations found
show l2tp destination lockout
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Name of destination and its lockout status. The status
indicates whether the destination is waiting for the
lockout timeout to expire (and how much time is left),
or waiting for the lockout test to start or finish
Number of destinations that are currently in lockout
state
Monitoring Locked Out Destinations
431