Activating Bluetooth ® Feature; Pairing A Bluetooth ® Device - MacDon M1170 Operator's Manual

®
Activating Bluetooth
®
The Bluetooth feature must be activated to allow mobile device pairing.
®
To activate the Bluetooth
1. Press POWER button (A) to turn the radio on.
2. Press and hold VOL/SEL knob (B) for two seconds. MENU is
displayed on screen (C).
3. Rotate VOL/SEL (B) to highlight BT SET menu and press
VOL/SEL to select. BLUETOOTH ON/OFF is displayed (C).
4. Press VOL/SEL to select BLUETOOTH.
5. Rotate VOL/SEL knob to display ON and press VOL/SEL to
select.
6. Rotate VOL/SEL knob and select DISCOVER.
7. Rotate VOL/SEL knob to display ON and press VOL/SEL to
select.
®
Pairing a Bluetooth Device
The installed radio allows the operator to pair a Bluetooth
®
Bluetooth is enabled and radio has been set to DISCOVER mode. Refer to
To pair a mobile device, follow this procedure:
1. Press POWER button (A) to turn radio ON.
This will set the radio to Bluetooth
®
Bluetooth feature has been activated. Refer to
®
Bluetooth Feature, page
2. Turn the mobile device's Bluetooth
device's operator's manual. The radio appears as a
discoverable device.
3. Select CD-5000 BT on the mobile device to connect.
NOTE:
A passkey is required to connect to the Bluetooth
The default passkey is four zeros (0000).
4. Enter the default passkey 0000. The radio will display
CONNECTED (B) and the Bluetooth
upper right corner of the screen.
214733
OPERATOR'S STATION
Feature
feature, follow this procedure:
®
discover mode if the
65.
®
to ON. Refer to the
®
icon (C) appears in the
Figure 3.47: Bluetooth
®
phone or audio device. Before proceeding, check that
Activating Bluetooth
Activating
®
radio.
Figure 3.48: Radio Display
65
A
B
® ®
Radio
®
Feature, page
A
B
C
65.
C
Revision A