Activating The Double Windrow Attachment (Dwa); Setting One-Touch-Return Buttons (A, B, C) - MacDon DWA Operation And Parts Manual

2.6 Activating the Double Windrow Attachment (DWA)

NOTE:
DWA is associated with the header ID setup. For
more information on header setup see your header or
windrower manual.
To activate the DWA, follow these steps:
1. During header setup,
attachments (A).
2. Select DWA and the display will show an image of
the buttons to be used to control the DWA with each
particular header. DWA is now activated.

2.6.1 Setting One-Touch-Return Buttons (A, B, C)

One-Touch-Return buttons ("A", "B", and "C" on the ground speed lever [GSL] handle) allows you to choose
and apply three presets.
Open the main menu, follow these steps:
1. Press soft key 5 (A) to open the main menu.
2. Use the Harvest Performance Tracker (HPT) scroll
knob (B) or the ground speed lever (GSL) scroll wheel
(not shown) to place the red cursor over the Settings
icon (C).
3. Press the HPT scroll knob (B) or the GSL select button
(not shown) to select the highlighted icon.
214048
ASSEMBLY/SETUP INSTRUCTIONS
scroll down and select
Figure 2.26: Header Setup – Attachments
Figure 2.27: Selecting DWA
Figure 2.28: Opening the Main Menu
22
Revision A