Recommended Tools - Oracle EAGLE Installation Manual

5201 B through 5208 B (connectors J40 through J33)
5211 A through 5218 A (connectors J16 through J9)
5211 B through 5218 B (connectors J32 through J25)
Extension shelf 53
5301 A through 5308 A (connectors J24 through J17)
5301 B through 5308 B (connectors J40 through J33)
5311 A through 5318 A (connectors J16 through J9)
5311 B through 5318 B (connectors J32 through J25)
6.1.2.1.6 Extension Frame EF-04
Extension shelf 61
6101 A through 6108 A (connectors J24 through J17)
6101 B through 6108 B (connectors J40 through J33)
6111 A through 6118 A (connectors J16 through J9)
6111 B through 6118 B (connectors J32 through J25)

6.1.2.2 Recommended Tools

Oracle tools should be labeled "Property of ORACLE" with either a press-on Field Tool
Identification label or Field Tool Identification wrap.
• Safety glasses
• Tie-wrap tool
• Diagonal cutters
• Flush cutters
• Slotted screwdriver, 1/8-inch blade with 8-inch shank
• 3/8-inch shrink-wrap
• Heat-shrink gun (hot air blower)
• Torque screwdriver
• Wire-wrap gun
• 22-gauge wire-wrap bit
• 24-gauge wire-wrap bit
Interface Cable Installation
Examine the labels on the ends of the interface cables to determine the system
backplane connection location "FROM" information on label and DSX cross-connect
panel location "TO" information on label for each cable.
Run the cables on the cable rack to the cross-connect panel on the Miscellaneous Frame in
groups of eight. There are four groups per extension shelf and groups per control shelf (a
total of 20 per control shelf). The jack numbering on the cross-connect panel determines
which side of the frame to run the cable. Viewing the frame from the rear, cables going to
Chapter 6
Intra-system Cable Installation
6-9