Table of Contents
Advertisement
Figure 6-19
Fan Tray
Insert the fan tray into the fan tray bracket. You might need to tilt the fan tray up as it is
12.
pushed in so that it is completely inserted into the bracket. After insertion, be sure the
front of the fan tray is recessed in 1/2 inch with respect to the front frame rails.
Figure 6-20
Fan tray inserted into fan tray bracket in the frame- front view
When the fan tray is aligned and in place, attach the fan tray to the fan tray bracket by
13.
tightening the screws on the left and right sides of the rear of the fan tray bracket. There
are two screws on each side. These screws must be tightened from the rear of the frame.
Chapter 6
Fan Assembly Installation and Cabling
6-39
Advertisement
Table of Contents
