Table of Contents
Advertisement
Figure 6-12
Verify that both IMT bus LEDs are green.
8.
Record the activity in the site maintenance log.
9.
6.4 Fan Assembly Installation and Cabling
warning:
Do not carry exposed metal keys or tools in pockets or on belts when
working on or around system equipment.
warning:
Do not wear metal rings, watches, or jewelry on wrists or hands when
working on system equipment or other related electrostatic sensitive
components. Always wear a wrist strap or other electrostatic protection when
handling printed circuit cards and other electrostatic sensitive devices.
Caution:
Be sure to install the fan assembly 890-0001-04 before installing the HCMIM
card.
This section shows how to install the optional Fan Assembly 890-0001-04 and Fan
Assembly 890-1038-01/890-1038-02. All of these fan assemblies can be installed in
the standard frame and the Heavy Duty Frame. Be sure to determine which type of
frame you have before performing these procedures.
Push in Inject/Eject Clamps
Chapter 6
Fan Assembly Installation and Cabling
6-32
Advertisement
Table of Contents
