Table of Contents
Advertisement
6.1.1 Install IMT Cables
The Interprocessor Message Transport (IMT) cables are specific lengths, based on
their application. Termination information is furnished on the cable labels. Refer to
Cables and Adapters
danger:
Always wear a wrist strap or other electrostatic protection when handling
printed circuit cards and other electrostatic-sensitive devices.
Procedure — Install IMT Cables
Route the cable and connect to the backplane connector specified on the cable
1.
label.
The IMT cables route down the left side of the frames, see
For the IMT cables, tighten the barrel securely on each connector.
2.
Figure 6-1
Dress each cable and secure with cable ties.
3.
Ensure that each cable tie strap is cut flush with the cable tie head so that no
sharp edges are exposed.
and
Part Numbers
Interprocessor Message Transport Cables
Chapter 6
Intra-system Cable Installation
Figure
6-4.
6-2
Advertisement
Table of Contents
