Table of Contents
Advertisement
•
E1 (2.048 Mb/s at 120 Ohms impedance)
The third party SuperMIX modules backplanes will be configured to accommodate a
variety of input/output (I/O) termination connector types. Any combination or "mix" of
backplanes in one chassis is acceptable. Refer to Telect® "SUPER MULTIPLE-
INTERFACE CROSS-CONNECT (SUPERMIX) USER MANUAL" 110339 issue A Rev.
1
Note:
This information is for 120 to 75 ohms only.
Figure 6-52
Miscellaneous Frame with 120 Ohm Converter
Note:
Customers may purchase the miscellaneous frame from Oracle.
Chapter 6
Ohms Converter International Market
6-104
Advertisement
Table of Contents
