A
LED Information
A.1 Introduction
This section shows the card face plates and describes the Light Emitting Diodes (LEDs) for
each card. This section assists maintenance personnel in troubleshooting.
EAGLE frames are configured with modules (cards) that provide specific functions and
services. LEDs together with part numbers, text and bar codes are located on the faceplates
of the cards. The cards are listed in alphabetical order of the full card name. Each card is
identified by its acronym first, then by the full name of the card.
A.2 CI, Clock Interface Card, Holdover Clock
Figure A-1
Holdover Clock CI Card LEDs
A-1