Table of Contents
Advertisement
B.1.11 Interprocessor Message Transport Connectors
Inter-processor Message Transport (IMT) connectors on the control shelf backplane provide
connections between the system shelves as part of the two high speed IMT buses.
J8, J16, J58, J64 on Control Shelf backplane 04 and J23, J22, J75, J74 on Control Shelf
backplane 06/07
Figure B-30
Table B-30
A IMT IN backplane (P/N 850-0330-04)(J8)
A IMT IN backplane (P/N 850-0330-06/07)(J23)
A IMT OUT backplane (P/N 850-0330-04)(J16)
A IMT OUT backplane (P/N 850-0330-06/07)(J22)
B IMT IN backplane (P/N 850-0330-04)(J58)
B IMT IN backplane (P/N 850-0330-06/07)(J75)
B IMT OUT backplane (P/N 850-0330-04)(J64)
B IMT OUT backplane (P/N 850-0330-06/07)(J74)
B.1.12 General Purpose Relay Connectors
General Purpose Relay connectors provide software controlled, general purpose outputs for
the system. Currently, Generic Program (GP01) provides reset signals for any optional OAPs
that may be present in the system.
B.1.12.1 GP01
J75 on Control Shelf backplane 04 and J71 on Control Shelf backplane 06/07
Figure B-31
IMT Connector
IMT Connector Pins
Connector
General Purpose Relay Connector 01
Control Shelf Connectors
Pin
Signal
1
AIMTIN+_78
2
AIMTIN-_78
1
AIMTOUT+_78
2
AIMTOUT-_78
1
BIMTIN+_78
2
BIMTIN-_78
1
BIMTOUT+_78
2
BIMTOUT-_78
Appendix B
B-35
Advertisement
Table of Contents
