Table of Contents
Advertisement
E5-ENET/E5-ENET-B and Fan Option, EDCM, E5-SM4G/E5-SM8G-B Cabling
If E5-ENET/E5-ENET-B cards are in slots 11,13,15, or 17, the cables is run down
the left side of the frame (as seen from the back of the frame).
Run the cable off the side of the cable rack on the correct side of the frame.
4.
Route the cable down the traverse arms to the correct shelf location.
Route the cable around the top edge of the shelf and connect it to the A connector,
5.
of the odd numbered card slot where the E5-ENET/E5-ENET-B card is located,
see
Figure
6-8.
Caution:
Always trim tie-wrap flush and turn the trimmed tie-wrap to the rear of the
cable bundle when facing the rear of the frame.
All cable ends must be labeled "TO" and "FROM" location information on both
6.
ends.
Figure 6-8
E5-ENET/E5-ENET-B Family Cabling, Enhanced Bulk Download
Chapter 6
6-16
Advertisement
Table of Contents
