Cables And Adapters; Cable And Adapter Use - Oracle EAGLE Installation Manual

For cables not ordered through Oracle, confirm source, part number, and origination/
8.
destination points before labeling them.
After you have labeled all cables, you are ready for cable installation.
C.2 Cables and Adapters
Cables and adapters are listed in alphabetical order.
The words NOT TERMINATED or UNTERMINATED refers to the end of the cable that is not
equipped with a connector in manufacturing and the wires must be cut, dressed, and
connected at the site specific location.
C.2.1 Cable and Adapter Use
Table C-1
vacant uncabled slot in a shelf.
Note:
References to E5- type cards include E5-B type cards.
Note:
Exceptions, additions, and clarifications to the following tables are by superscript
numeric notation relating to the listed notes located at the end of this section. The
notations are indicated as a numbered step reference (such as 1) which
corresponds to the appropriate note which is shown at the end of this section. For
example, a table cell with X
that component.
Table C-1
Card
P/N
E5-E1T1-B
870-2970-xx
Note:
All cables must be labeled with "TO" and "FROM" destinations
shows the cables and adapters used for E5-type cards in new installations in a
1,2
Cable/Adapter Use - New Installation
Applica Adapter
tion
E1 No adapters
required
T1 No adapters
required
would indicate that notes 1 and 2 are applicable to
Qty Cable
830-1132-XX
7112462
830-1197-XX
Appendix C

Cables and Adapters

Qty
1
2
C-3