Table of Contents
Advertisement
Where xxxx is the location of the card.
The following is sample output.
rlghncxa03w 01-03-02 13:05:05 EST Rel 28.1.0
FLASH Memory Downloading for card 1105 Started.
rlghncxa03w 01-03-02 13:05:05 EST Rel 28.1.0
BPDCM Downloading for card 1105 Complete.
rlghncxa03w 01-03-02 13:05:05 EST Rel 28.1.0
Command Completed.
;
Enter the following command to activate the FLASHGPL on the card:
6.
act-flash:loc=xxxx
Where xxxx is the location of the card.
The following is sample output:
rlghncxa03w 04-02-04 13:05:05 EST EAGLE 31.3.0
FLASH Memory Activation for card 1105 Started.
;
rlghncxa03w 04-02-04 13:05:05 EST EAGLE 31.3.0
FLASH Memory Activation for card 1105 Completed.
;
rlghncxa03w 04-02-04 13:05:05 EST EAGLE 31.3.0
Command Completed.
;
Enter the following command to return the upgraded MCPM card into service.
7.
This causes the MASP to begin downloading tables to the new MCPM card.
alw-card:loc=xxxx
Where xxxx is the MCPM card location.
When the card has been successfully loaded (there will be a response on the
terminal that downloading is complete).
This can take up to 10 minutes.
Enter the following command to verify the card is operational (IS-NR).
8.
rept-stat-measIf the secondary MCPM card is operational, go to
call the
My Oracle Support
If you want to upgrade a spare MCPM, go to
9.
Otherwise, got to
16
.
Remove the spare MCPM card from the spare card storage shelf and place it into
10.
an ESD container.
Next, enter the following command to remove the previously upgraded secondary
MCPM card from service. This card will become the spare. Do not use the force
(MOS).
10
.
Chapter 6
User Upgrade Procedures
9
. If it is not,
6-26
Advertisement
Table of Contents
