Clock B Out Connector; Bits Clock Connectors - Oracle EAGLE Installation Manual

Table B-17
Pin
11
12
13
B.1.7.4 Clock B Out Connector
J60 on Control Shelf backplane 04.
Figure B-20
Table B-18
1
2
3
4
5
6
7
8
9
10
11
12
13
B.1.8 BITS Clock Connectors
The system connects to the Building Integrated Timing System (BITS) clocks using two
DB-15 style connectors. The two clocks are labeled Primary and Secondary and are supplied
from the central office clock. Both clocks go to both TDMs, where one is selected to provide
the system clocks used to provide system timing.
J41, J42 on Control Shelf backplane 04 and J48, J49 on Control Shelf backplane 06/07
(Cont.) Clock B In Connector on Control Shelf backplane 04
Signal
FANBALM-
Clock B Out Connector on Backplane
Clock B Out Connector on Control Shelf backplane 04
Pin Signal
FANAALM-
FANCNTRL
FANBALM-
Pin
24 SH3B8KHZ+_50
25 SH3B8KHZ-_50
Pin
14
SH2B56KHZ+_50
15 SH2B56KHZ-_50
16
SH2B8KHZ+_50
17 SH2B8KHZ-_50
18 SH3B56KHZ+_50
19 SH3B56KHZ-_50
20 SH3B8KHZ+_50
21 SH3B8KHZ-_50
22
23
24
25
Appendix B
Control Shelf Connectors
Signal
Signal
B-19