St3, Stratum-3 Clock Card, Holdover Clock - Oracle EAGLE Installation Manual

Table A-4
LED
Name
APPL
IMTA
IMTB
INTERF
ACES
E1/T1
INTERF
ACES
ENET
PORT1-
PORT8
LINK1-
LINK8
A.14 ST3, Stratum-3 Clock Card, Holdover Clock
Table A-5
FAIL
LOCK
REF A
SLIC Front Panel LEDs
Control
FPGA / Application Software
LIIC FPGA / Communication
Software
LIIC FPGA / Communication
Software
FPGA / Application Software
FPGA / Application Software
PHY / Application Software
FPGA / Application Software
ST3 LEDs
LEDs
RED – This card has failed.
BLANK – No card failure detected.
RED – Input has failed.
BLANK – No input failure detected.
GREEN – Card is tracking the output of clock input card A.
BLANK – Not tracking output of clock input card A.

ST3, Stratum-3 Clock Card, Holdover Clock

Colors
Off / Red / Green
Red / Green
Red / Green
Green / Off
Green / Off
Off / Red / Green
Off / Red / Green
Descriptions
Appendix A
Definition
Off - No power
Red - Card is booting
Green - Card is running
Application
Red -Not connected to BUS
Green - Active and
Connected to Bus
Amber - MUX card on the
same shelf is seated and not
inhibited; bus not available
Red - Not connected to BUS
Green - Active and
Connected to Bus
Amber - MUX card on the
same shelf is seated and not
inhibited; bus not available
Green - Enabled
Off - Disabled
Green - Enabled
Off - Disabled
Off - Not configured
Red - Cable removed and/or
not synced
Green - 10/100Mb link speed
Off - No SLKS configured
Red - All Configured SLKS
OOS
Green - All SLKS aligned
A-17