Table of Contents
Advertisement
Figure 5-27
5.6 FAP Alarm System Test
The following procedure describes system wide fuse alarm testing of the FAP.
Issue the command to login to the STP terminal 1.
1.
login:uid=eagle
Enter the password.
2.
Press the F11 key for KSR mode. The following command response is displayed.
3.
Command Accepted - Processing
;
Issue the command to change the terminal security features to "ALL = YES" for
4.
terminal 2.
> chg-secu-trm:all=yes:trm=2
The following command response is displayed.
5.
Command Accepted - Processing
Fuse (GMT Brand Name)
tekelecstp 00-05-31 06:55:22 EST Rel XX.X.X-XX.X.X
LOGIN:UID=EAGLE
Command entered at terminal #1.
tekelecstp 00-05-31 06:55:23 EST Rel XX.X.X-XX.X.X
NOTICE: This is a private computer system.
Unauthorized access or use may lead to prosecution.
0 LOGIN failures since last successful LOGIN
Last successful LOGIN was on port 1 on 00-05-31 @ 06:46:46
channel 00-05-31 06:10:28 EST Rel XX.X.X-XX.X.X
CHG-SECU-TRM:ALL=YES:TRM=2
Command entered at terminal #1.
Chapter 5
FAP Alarm System Test
5-30
Advertisement
Table of Contents
