Approximate Installation Time; Installation Tools; Standard Installation Tools - Oracle StorageTek SL3000 Manual

Approximate Installation Time

Approximate Installation Time
The table below shows the estimated times for the installation of modules and
components. At least two qualified service representatives should install the library.
The times listed below do not include library initialization, testing, audits, and feature
upgrades. Installation services are required with the purchase of the SL3000 library.
Contact an Oracle sales representative for more information.
Table 2–9
Module/Component
Base with 8 drives (standard)
Base and DEM
Base and CEM
Each additional CEM
Two PEMs
AEMs (each)
CAPs
Tape drive (each drive)
Operator panel or window
Firmware
Integration (cables, hubs, switches, connections)
Media install (each)

Installation Tools

The tables below list the installation tools required for the SL3000 library. Oracle
service personnel should obtain the standard tools locally or from the SL8500
installation kit if available.
Table 2–10
Standard Tools
Torx screwdriver with T8, T10, T15, T25 bits T8: Removal and replacement of the PUK card.
3/8-in. drive ratchet wrench
5/16-in. hex Allen on 3/8-in. drive
9/16-in. socket on 3/8-in.-drive
Adjustable wrench (must accept 7/8-in.
nut)
Phillips and flat blade screwdrivers
Power drill (optional)
Wire side cutters
Multimeter
Flashlight, step stool
Pallet jack
2-10 StorageTek SL3000 Library Guide
Installation Time Estimates

Standard Installation Tools

1
1
1
Time
Estimate Personnel
(hours) Required
3 2
5 2
4 2
2 2
2 2
2 2
1 2
0.5 1
0.75 1
0.2 1
8 1
0.02 1
Use
T10: PUO, PUW, PUN, PUF, PUZ cards. Track stops.
T15: Operator panel, window, blank plate, arrays
T25: Shipping brace, rails, and CAP screws.
Module height adjustment, joining modules
Module height adjustment, joining modules
Module removal from pallet
Lock weight distribution pads
General assembly
General assembly. Adjust the torque settings to 2.8 Nm (25
in.-lb) for T-25 screws and 0.6 Nm (5 in.-lb) for T-10 screws.
Cutting shipping straps
Electrical testing
General assembly
Moving equipment
Total Person
Hours
6
10
8
4
4
4
2
0.5
0.75
0.2
8
variable