Figure 3-1
Part number, LEDs, text and bar code (CLEI and serial number) are located on the faceplate
of each card. The cards in the frames are configured with specific functions and services.
3.4 Labeling
This section provides general labeling instructions for cables, frames, shelves, and fuse and
alarm panels.
3.4.1 Cable Labeling
Before installing, use this procedure to label the cables to ensure connection to the proper
ports and ease of future maintenance.
Tools
•
Installer's Cable Running List
•
All cables listed in Installer's Cable Running List
•
Any non-Oracle cables
•
Cable labels (including blank labels for non-Oracle cables)
•
Fine point marker
Locate the Installer's Cable Running List in the Equipment Specification for the site.
1.
Refer to for an example.
Removing an EAGLE card
Chapter 3
Labeling
3-3