Table of Contents
Advertisement
C.2.4 Crossover (CAT-5) Cable
Table C-3
North American
Figure C-4
C.2.5 E5-ENET ADAPTER (DB26 Male-to-Dual RJ45)
The Ethernet cable pinouts differ between the E5-ENET card and the DCM or single-slot
EDCM cards.
Adapter 830-1102-02 is required for installation of the E5-ENETwhen the DCM cable is
replaced with a CAT5 straight-through cable 830-1174-xx. The adapter is connected to the
backplane and the CAT5 straight-through cable cable is connected from the other side of the
adapter to a switch, or a hub, or a patch panel (same place the DCM cable was terminated).
If the card inserted into the slot does not match the backplane connector, the interface will not
function.
Crossover CAT-5 Cable
Part Number
830-0723-01
830-0723-02
830-0723-03
830-0723-xx
Crossover CAT-5 Cable
International
830-1173-01
830-1173-02
830-1173-03
830-1173-xx
available in many more lenghts
Appendix C
Cables and Adapters
Length
meters
feet
0.30
1
0.90
3
1.37
4.5
C-7
Advertisement
Table of Contents
