ZS3-2 Controllers
Tools and Equipment Needed
To install the system, you need the following tools:
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
Pencil, stylus, or other pointed device, for pushing front panel buttons
■
You also need a system console device, such as one of the following:
Sun workstation
■
ASCII terminal
■
Terminal server
■
Patch panel connected to a terminal server
■
Tasks
ZS3-2 Controllers Tasks
▼
Installing the Mounting Brackets and Slide Rail Assemblies
If the mounting brackets are shipped inside the slide rails, you must remove them before
beginning this procedure, as follows.
Unpack the slide rails and locate the slide rail lock at the front of the assembly.
1
Squeeze and hold the tabs at top and bottom of the lock (1) while you pull the mounting bracket
2
out to the stop.
82
Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02