Alarm Cable (Holdover Clock - Oracle EAGLE Installation Manual

All references to ROHS are ROHS compliant.
1.
If these older cables exist, they may be used in lieu of newer cables.
2.
•
•
Backplane connector A (must be used with adapter 870-1343-02).
3.
Backplane connector B (must be used with adapter 870-1343-01).
4.
This configuration is used if both ATM links in one cable.
5.
This configuration is used if the A and the B port to carry the ATM links over 2 cables.
6.
LNP Node 384 Million or ELAP 8.0 .
7.
Existing cables must be replaced with 830-1174-XX or non-ROHS 870-0724-XX.
8.
ADD 830-1132-xx cable to drop the second physical port to the B port.
9.
ADD 830-1184-xx or 830-1197-XX to drop the second physical port to the B port.
10.
C.2.2 Alarm Cable (Holdover Clock)
Figure C-2
Non-ROHS 830-0788-XX/ROHS 830-1177-XX DB26 – RJ45 (Straight thru Shielded)
Non-ROHS 830-0789-XX/ROHS 830-1178-XX DB26 – RJ45 (Crossover Shielded)
Holdover Clock Alarm Cable
Appendix C
Cables and Adapters
C-5