Table of Contents
Advertisement
Figure 6-5
Label DSX panel
8.
6.1.3 LAN Ethernet Cable Installation for ACM
This section contains the procedures for installing the Local Area Network (LAN) Ethernet
cable, see
remote host system through an Ethernet network. In the system, communications with the
host is interfaced through an Application Communication Module (ACM). Communications
with the ACM is accomplished through:
•
The system backplane interface connector associated with that particular ACM
•
A 15-pin to 26-pin adapter
•
A single port Ethernet transceiver Media Access Unit (MAU)
•
A 10BASE-2 Thin net coax connection or 10BASE-T twisted pair connection to the
Ethernet network
6.1.3.1 Customer Supplied Ethernet Cable Requirements
If a customer chooses to supply their own Ethernet cables for EAGLE (customer-supplied
cables are not subject to Oracle warranty), the following requirements must be met:
Customer-supplied Ethernet cables for EAGLE must be shielded, meet the industry standard,
and avoid dissimilar metals at the RJ45 connector interface. The required standards include:
Interface Cable Cross-Connect Panel Connection
Figure 6-7
for the location of equipment. The LAN provides selected data to a
Chapter 6
Intra-system Cable Installation
6-11
Advertisement
Table of Contents
