System Clock Connectors; A Clock 0 Through A Clock - Oracle EAGLE Installation Manual

Table B-12
1, 2, 6, 7, 13, 14
3
4
5
8
9
10
11
12
15
* not currently supported
B.1.6 System Clock Connectors
The control shelf backplane provides system clock output to the rest of the system from the
TDMs. Redundancy is accomplished by allowing TDM A and TDM B to distribute clocks
independently of each other.
B.1.6.1 A Clock 0 through A Clock 5
J7, J14, J15, J56, J57, J63 on Control Shelf backplane 04 and J7, J21, J20, J64, J65, J72
on Control Shelf backplane 06/07
Figure B-15
Table B-13
Connector
850-0330-04
J7
(CF00)
(rack 0)
850-0330-06/07
J7
OAP Alarm Connector
Pin
Not used
OAPMNNC - OAP Alarm, Minor, Normally Closed
OAPMJNC - OAP Alarm, Major, Normally Closed
OAPCRNC - OAP Alarm, Critical, Normally Closed
OAPFA+ - OAP Fuse Alarm (+)*
OAPBNO - OAP Alarm, busy, Normally Open*
OAPMNNO - OAP Alarm, minor, normally Open
OAPMJNO - OAP Alarm, Major, Normally Open
OAPCOM - OAP Alarm, Common
OAPFA- - Row Fuse Alarm (-)*
A Clock 0 Through A Clock 5 Connectors
A Clock 0 Through A Clock 5 Connectors
Pin Signal
1
2
MBUS0
TX-_50
3 MBUS0
TX+_50
4 MBUS0
RX-_50
Signal
Pin Signal Pin
8 MBUS1 15
RX-_50
9 16
MBUS1
RX+_50
10 MBUS2 17
TX-_50
11 MBUS2 18
TX+_50
Appendix B
Control Shelf Connectors
Signal Pin Signal
A56KHZ 22 A56KHZ
0-_50 2+_50
A8KHZ0 23 A56KHZ
+_50 2-_50
A8KHZ0 24 A8KHZ2
-_50 +_50
A56KHZ 25 A8KHZ2
1+_50 -_50
B-15