A Clock And B Clock Cable Replacement - Oracle EAGLE Installation Manual

You have completed the cable replacement procedure for the high‑speed source clock
cables on EAGLE systems with control shelf backplane (P/N 850‑0330‑03/04.

6.6 A Clock and B Clock Cable Replacement

Proper support for HMUX and alarm reporting require that all A and B clock cables be
of P/N 830-0398-xx (domestic) or P/N 830-1150-xx (international). Clock cables of P/N
830-0404-xx must be replaced. The A and B clock cables typically are from the control
shelf and those coming in from an extension shelf. These cables contain proper alarm
alert capabilities and support HMUX. See
This procedure can also be used for regular clock cable replacement.
Perform the replacement during a maintenance window and prior to fan assembly
installation.
Note:
There should be no clock error messages present in the output of the
rept-stat-trbl command. If clock error messages are present, contact the
My Oracle Support (MOS)
A Clock and B Clock Cable Replacement
for assistance.
Figure 6-37 and Figure
Chapter 6
6-38.
6-82