Table of Contents
Advertisement
Chapter 2
Electrostatic Discharge
Caution:
The Branch Circuit Overcurrent Protection shall be rated at 48V minimum and 40A
maximum.
Caution:
Install equipment in restricted access areas in accordance with articles 110-16,
110-17, and 110-18 of the National Electric Code, ANSI/NFPA 70.
Caution:
Incorporate a readily accessible approved disconnect device in the field wiring.
Caution:
Connect to a reliably grounded SELV source that is reliably earthed and electrically
isolated from the AC source.
Caution:
Use only listed closed-loop connectors for connection to the power supply.
2.4 Electrostatic Discharge
danger:
Do not wear metal, chains, rings, watches, or jewelry or carry exposed metal, keys,
or tools in pockets when working on system equipment or other related
electrostatic-sensitive components.
danger:
Always wear a wrist strap or other electrostatic protection when handling printed
circuit cards and other electrostatic-sensitive devices.
2-5
Advertisement
Table of Contents
