Table of Contents
Advertisement
4.4 Removing Frame Panels
Pull down on the upper panel clips and pull the panel away from the frame.
1.
Pull down on the lower panel clips and pull the panel away from the frame.
2.
Grasp the handle in the middle panel and lift the panel off of the frame bracket shown in
3.
Figure 4-16
Figure 4-16
4.5 Installing Unit Separation Brackets
Use pre-existing holes in the frames.
1.
Use 12 screws to attach three unit separation brackets with studs as shown in
2.
Figure
.
Heavy Duty Frame Panels
4-17.
Chapter 4
Removing Frame Panels
4-19
Advertisement
Table of Contents
