Table of Contents
Advertisement
Figure 6-13
System Air Baffle
Remove the baffle through the front of the frame. Then, remove the two screws
5.
holding the left and right side baffle brackets to the frame and remove the
brackets.
Install the new side brackets for the new fan tray into the frame. The side brackets
6.
are installed from the front of the frame just below the shelf containing that cards
that require the fan. Use the 12-24-x1/2 screws provided to attach the brackets to
the left and right front frame rails. The top screw hole is 5/16 inch below the shelf
containing the cards. Be sure not to completely tighten the brackets at this time.
Chapter 6
Fan Assembly Installation and Cabling
6-34
Advertisement
Table of Contents
