Collect Device Health Data And Set The Sample Interval - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

Central management

15. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Collect device health data and set the sample interval

You can enable or disable the collection of device health data to upload to Digi Remote Manager, and

configure the interval between health sample uploads. By default, device health data upload is

enabled, and the health sample interval is set to 60 minutes.

To avoid a situation where several devices are uploading health metrics information to Remote

Manager at the same time, the IX14 device includes a preconfigured randomization of two minutes for

uploading metrics. For example, if Health sample interval is set to five minutes, the metrics will be

uploaded to Remote Manager at a random time between five and seven minutes.

To disable the collection of device health data or enable it if it has been disabled, or to change the

health sample interval:

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Monitoring > Device Health.

IX14 User Guide

Collect device health data and set the sample interval