With Hybrid/Coupler - NEC iPasolink 200 Manual

5-18
5.1.2

With Hybrid/Coupler

This section explains the antenna direct mounting type ODU installation with
Hybrid/Coupler.
Mounting
Note
O-ring
O-ring
RFS SB1 type Bracket
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
The details are referred to the installation manual which is attached to
the antenna.
Note The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
ANDREW VHLP type Bracket
Hole for guide pin
Mounting hole for
Hybrid/Coupler
Note
Hole for guide pin
Mounting hole for
Hybrid/Coupler
O-ring
RFS C-Mount type Bracket
The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
ODU MOUNTING
Hole for guide pin
Mounting hole for
Hybrid/Coupler
Installation