Main Specifications - GRAPHTEC FCX2000 Service Manual

1.3

Main Specifications

Configuration
Drive system
Media hold-down method
Effective cutting area
Mountable media (Y-axis)
Maximum cutting speed
Max. acceleration
Specifiable speeds
Max. force
Settable force
Min. character size
Mechanical resolution
Programmable resolution
Distance accuracy
Perpendicularity
Repeatability
Interfaces
Buffer memory
Command sets
Number of cutters/pens
Tool type
Compatible media
Offline output function
Bar code data management function
LCD display
Usable roll paper
Power supply
Operating environment
Guaranteed precision operating
environment
External dimensions
(H x W x D)
Weight (including stand)
*1 : HP-GL is a registered trademark of the US Hewlett Packard Company.
*2 : Use CB30UC-1 without warpage
*3 : Use cutter blade CB15UA
*4 : Use Cutter blade CB15U-K30
*5 : Cut material that can be fixed by electrostatic adhesion
FCX2000-UM-251-9370
FCX2000-60VC
Flatbed
Digital servo
VC models: Vacuum suction
ES models: Electrostatic adhesion
610 x 920 mm
950 mm
400 mm/sec (Omnidirection)
5.88 m/s2 (Omnidirection)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40 cm/s 16 steps
TOOL 1: Max. 4.9N (500gf) TOOL 2: Max. 9.8N (1Kgf)
TOOL 1: Set 40 steps TOOL 2: Set 40 steps
About 10mm2 alphanumeric characters (depending on the materials and font)
0.0025 mm
GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL
Distance moved within ±0.1% or less or within ±0.1 mm or less, whichever is larger (Plotter mode)
0.5mm/900 mm or less (Plotter mode)
0.1 mm or less: Expansion and contraction of the media are excluded (plotter/cutting mode)
USB2.0 (full speed) , RS-232C, Ethernet 10BASE-T / 100BASE-TX
2 MB
GP-GL and HP-GLTM emulation
2
VC models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
ES models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
MG models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen
VC models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 0.8 mm compressed
foam sheet *4
• Thickness less than 1 mm sandblasting
rubber
• F, G flute *2
• Clear package sheet
• High-intensity reflective film *3
USB memory - 64 files
Yes
Graphic type (240 × 128 dot)
Roll paper hanger
Usable roll paper width: 950 mm, weight: 5 kg
100 to 240V AC 50/60Hz
10 to 35˚C, 35 to 75% RH (non-condensing)
16 to +32˚C, 35% to 70% RH (non-condensing)
1344 mm × 1409 mm × 930 mm
(Including media stocker)
Approx. 76 kg
FCX2000-120VC/ES
1200 x 920 mm
mode: 0.025 mm
TM
ES models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 1 mm sandblasting
rubber
• F, G flute *2
• Clear package sheet *5
193 4mm × 1409 mm × 93 0mm
(Includeding media stocker)
VC model : Approx. 99kg
ES model : Approx. 95kg
1-3
1 INTRODUCTION
FC2000-180VC
1800 x 920 mm
2534 mm × 1409 mm × 930 mm
(Includeding media stocker)
Approx. 116 kg