GRAPHTEC FCX2000 Service Manual page 22

(4) Carry the main unit by the four persons, and then put the main unit onto the stand.
Confirm direction of the stand, the long leg side should be rear side when the main unit is installing to
the stand.
(5) There are positioning marks to the stand and the main unit.
Adjust the position by using the positioning marks when the main unit is installing to the stand.
(6) Fix the main unit to the stand by using the M5L20 socket screws.
(7) Securely tighten the eight M5L20 socket screws for center bars of the stand.
M5 x 20 socket screw