GRAPHTEC FCX2000 Service Manual page 141

How to place the black color of Electrostatic Adhesion Panel
(1) Clean and remove the glue from the honeycomb plate.
(2) Put the double-sided Adhesion tapes to the honeycomb plate as shown in the picture below.
FCX2000-UM-251-9370
8 DISASSEMBLY AND ASSEMBLY
Double-sided Adhesion tape
Put the double-sided Adhesion
tapes to the 4th edge of
honeycomb plate.
And then have the 2 mm gap to
the each double-sided Adhesion
tapes.
8-66
2 mm gap