Unpacking; Take Out The Stand Parts From The Box - GRAPHTEC FCX2000 Service Manual

2 Setup procedure
2.2

Unpacking

The FCX2000 is packed as like as the picture below.
(The packing is different that depends on the shipping destination. But the outline of unpacking will be
same.)
2.2.1

Take out the stand parts from the box

(1) Remove the rapping which is covering the stand box and the main unit box.
(2) Take out the stand box from the top part of box.
Stand box
FCX2000-UM-251-9370 2-2