GRAPHTEC FCX2000 Service Manual page 3

No. Date issued
1 16.11.22
2 16.12.05 The packing style was changed.
3 17.01.10 Effective cutting area for the FCX2000-180 was corrected.
4 17.02.09 Drawing is added for parts of hangers.
5 17.02.13 Note was added for the X flexible cable damage.
6 17.02.13 Confirming the Conditions of X flexible cable was added.
7 17.10.17 The part number for Slider Fix Plate was added.
8 17.10.17 The part name for U622623151 was corrected.
9 17.10.19 The Y bar height adjustment procedure was added.
10 18.01.17 The procedure added to install the X flexible cable.
11 18.01.17 The part name for X flexible cables were corrected.
12 18.01.17 The Note is added for the linear bearing of RMS.
13 18.04.12 The part name for Pen Block Assembly was corrected.
14 18.04.12 The Pen Block Height Adjustment Plate was added.
15 18.05.22 Procedure was corrected to replace the Electrostatic Adhesion Panel.
16 18.05.22 The parts number for the Electrostatic Adhesion Panel was corrected.
17 18.05.30 The parts number for the Stopper,Pen was corrected.
18 18.09.20 Installation procedure of optional warning light was added.
19 18.09.20 The parts numbers are added for the warning light.
20 18.09.20 The Y bar right angle adjustment procedure was added.
21 19.04.26 Typing miss was corrected.
22 20.06.29 The parts number for the Nylon washer, NNS-0410-10 was added.
23 21.09.17 The part number for Adjuster, TM-73-2 was corrected.
FCX2000-UM-251-9370
HISTORY OF REVISIONS
Description of revision
First Printing
i
Page Edition
All 01
2-2 02
1-1,1-3 03
11-15 03
2-8 03
Section 2.5 03
11-8 04
11-8 04
8-64 to 65 04
8-26 04
6-1, 11-8, 11-13 04
8-38 04
6-1,11-10 05
11-16 05
8-63 to 8-67 06
11-12 06
11-10 06
Section 2.7 07
11-1,11-3,11-16 07
Section 8.10 08
9-14,9-15 09
11-10,11-11 09
11-10 10