Table of Contents
Advertisement
FCX2000
CUTTING PLOTTER
Preface
Thank you for choosing this product. Carefully keep this manual in a handy location for quick reference as necessity prior
to use to ensure safe and correct use and also to thoroughly understand the functions and operate them effectively.
Prior to use
Be sure to read the attached "TO ENSURE SAFE AND CORRECT USE" prior to use. Otherwise, it may cause an
unexpected accident or fire.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make other
comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for damages
resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or registered
trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Graphtec Corporation.
Roles of each manual
•
Setup Manual (this manual) .......Read it to understand displaying method for FCX2000 User's Manual, method for
•
User's Manual (PDF data) ..........Read it to thoroughly understand the functions of FCX2000.
※
indicates reference page in this Setup Manual.
P.00
SERIES
connecting this Cutting Plotter with the PC, installing method for driver software, and to
prepare for the operation.
SETUP MANUAL
MANUAL NO. FCX2000-UM-8M2
622629021
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GRAPHTEC FCX2000 SERIES
Summary of Contents for GRAPHTEC FCX2000 SERIES
- Page 1 (2) The product specifications and other information in this manual are subject to change without notice. (3) While every effort has been made to provide complete and accurate information, please contact your sales representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make other comments or suggestions.
-
Page 2: Before Starting The Setup
Turn on the power source of Plotter in the middle of installing, and connect the USB cable. Install the software as necessity. Software enabling cutting data to be created through simple commands. B. Setup the Graphtec Pro Studio P.10 Create designs and edit characters/shapes using this software. -
Page 3: Attaching A Tool
Setting up the Plotter main unit 1 Attaching a Tool Attach a tool to the plotter. Attaching a Tool When attaching the tool in the tool holder, please note the following. • Push the tool all the way into the holder until its flange contacts the upper part of the holder and then tighten the screw firmly. •... -
Page 4: Removing The Tool
Make sure that the tool bracket is engaged on the tool's flange, and then tighten the screw. Flange Bracket to hold tool Removing the tool When removing the tool, turn it counterclockwise to remove the tool. 2 Loading the Media Supplement •... -
Page 5: About The Initial Setup Screen
Supplement Press the [CHART HOLD] key (to hold-down the media) again to release the electrostatic adhesion. The green lamp will no longer be lit. It may take some time to be able to hold-down the media by pressing the [CHART HOLD] key (to hold-down the media) depending on operating environment. -
Page 6: To Make 1 Cut With Set Value
To make 1 cut with set value To make 3 cuts with set value and ±1 of set value Make test cutting for one piece while Tool conditions are Make test cutting for three pieces while Tool conditions being set. are being set. -
Page 7: Installing The Software
Windows 10 (32-bit/64-bit), Windows 8.1 (32-bit/64-bit), Windows 8 (32-bit/64-bit ), Windows 7 (32-bit/64-bit ) (Plotter driver also supports Windows Vista.) Mac OS X 10.11 to 10.7 (Graphtec Studio also supports Mac OSX 10.6.) • When Using Macintosh Macintosh operating environments are supported by the following software. - Page 8 Proceed with installation according to your operating environment. A. Install FCX2000 Software: Install the [Plotter Driver]. B. Setup Graphtec Pro Studio: "Software enabling cutting data to be created through simple commands. Create designs and edit characters/shapes using this software." C. Setup Cutting Master 4: Plug-in driver that enables simple cutting through direct operation from within Adobe Illustrator and CorelDRAW.
- Page 9 Connect the network cable after installing it. (See Click on [Install FCX2000 Software]. “Connecting to the Computer” in the User’s Manual (PDF) After a while, the "Setup" screen of "Graphtec FCX2000 for more information on how to connect the network cable.) driver" will be displayed.
- Page 10 Install the software in accordance with your operating environment. B. Setup Graphtec Pro Studio Graphtec Pro Studio is the application software that enables The following screen will be displayed you to create and edit text and graphics. You can change the display language by selecting the language at the bottom of the screen.
- Page 11 Enter the activation code of Graphtec Pro Studio in the Enter the necessary information. The “ * ” indicates the “Activation Code” item. mandatory field. Click on the [Activation] after entering it. Click on the [Create Account] after entering them.
- Page 12 Enter the activation code that you entered in Step 3 in [Activation] item. Click on the [Next]. Select the connection method to be used and click on the [Finish]. Now, the model selection of the "Graphtec Pro Studio" is complete.
- Page 13 C. Set Up Cutting Master 4 Cutting Master 4 is a plug-in driver that can output directly to Click on the [Finish]. the cutting plotter from Adobe Illustrator / CorelDRAW. Installing "Cutting Master 4" * The computer to be installed must be connected to the Internet.
- Page 14 The following screen asking for the confirmation of Enter the registered “Email” and “Password” and then received Email will be displayed. click on the [Sign In]. Open the received Email and access to the provided The screen indicating that it is in the sign-in will be displayed. URL.
- Page 15 D. Install User's Manual Follow the below procedures to install the FCX2000 User's When this screen appears, click on [Finish]. Manual (pdf format). Adobe Reader must be installed on your computer in order to read the manual. This concludes the installation of the [User's Manual]. The newly-installed [User's Manual] will be registered under Installing "User's Manual"...
- Page 16 Click on the [Yes]. The following screen to confirm the Email will be displayed. Click on the [Close]. Open the received Email and access to the provided URL. Restart the computer. Start the “SAi Cloud Connect”. Click on the “SAi Cloud Connect” icon from the menu bar.
- Page 17 Enter the registered “Email” and “Password” and then Select the connection method to be used and click on click on the [Sign In]. the [OK]. * The port to be used must have been previously connected to the FCX2000. The screen indicating that it is in the sign-in will be displayed.
- Page 18 Set up the “USER GUIDE & SOFTWARE DVD” in the computer. Now, the model selection of the "Graphtec Studio" is complete. Open the “Graphtec Studio” folder in the DVD and double-click on the “GS_Vx.x.xxx.xxx_xxx.dmg” file. Drag the "Graphtec Studio" icon to the "Applications"...
- Page 19 622629021...
Need help?
Do you have a question about the FCX2000 SERIES and is the answer not in the manual?
Questions and answers