Installing The Warning Light Option - GRAPHTEC FCX2000 Service Manual

2.7

Installing the Warning Light Option

The Warning Light Option has the following three types.
Category
Factory option
This option is installed by
service engineer, after the
FCX2000 was installed to
customer
FCX2000-UM-251-9370
Option Name
OPH-A40
OPH-A41
OPH-A42
Description
The warning light bracket
is installed.
The warning light bracket
is not installed.
The control box is
corresponding for the
warning light option.
The warning light bracket
is not installed.
The control box is not
corresponding for the
warning light option.
2-11
2 Setup procedure
Work content
• Installing the warning
light to bracket.
• Connecting the warning
light connector.
• Installing the warning
light bracket.
• Wiring the cables in the
control box.
• Installing the warning
light to bracket.
• Connecting the warning
light connector.
• Replacing the control
box.
• Installing the warning
light bracket.
• Wiring the cables in the
control box.
• Installing the warning
light to bracket.
• Connecting the warning
light connector.