GRAPHTEC FCX2000 Service Manual page 65

Setting the Acceleration
Set the acceleration of the tool that is used in each of the tool condition numbers.
Setting range : 1 to 6
(1) Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/4) is displayed.
(2) Press the POSITION (▲) key.
(3) Press the [1] key (ACCELERATION).
ACCEL setting screen is displayed.
(4) Press the POSITION (
(5) Press the POSITION (▲▼) keys and increase or decrease the setting value.
(6) Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (2/4).
(7) Press the [COND/TEST] key. It will return to default screen.
FCX2000-UM-251-9730
) keys and select the condition number (CONDITION No.).
4-22
4. OPERATIONS