GRAPHTEC FCX2000 Service Manual page 168

(11) Similarly, adjust the 40 g-pen force as like as step 10.
Press the ENTER key if the measured value is within the specification range (48±4 g).
Press the ENTER key if you have input the recorded value.
The next specified pen force appears.
(12) Similarly, adjust the 130 g-pen force as like as step 10.
Press the ENTER key if the measured value is within the specification range (130±10 g).
Press the ENTER key if you have input the recorded value.
The next specified pen force appears.
(13) Similarly, adjust the 210 g-pen force as like as step 10.
Press the ENTER key if the measured value is within the specification range (210±20 g).
Press the ENTER key if you have input the recorded value.
The next specified pen force appears.
(14) Similarly, adjust the 515 g-pen force as like as step 10.
Press the ENTER key if the measured value is within the specification range (515±20 g).
Press the ENTER key if you have input the recorded value.
(15) The adjustment menus for the No.2 pen force will be displayed after you have finished the adjustments
for the No.1 pen force.
Adjust the pen pressure for the No.2 pen force in the same way as you did for the No.1 pen force.
(16) Proceed to the adjustments for the 10 g to the 1000 g.
(17) When the adjustments have been completed for the No.2 pen force, the following menu is displayed.
When the measured pen force is the specified value, press the ENTER key. The next specified pen force
appears on the LCD panel.
Repeat the above procedure in the following sequence.
Displayed
No.1 pen pressure
target force
10
48
130
210
515
-
(18) Press the ESC key to exit from the pen force adjustment menu.
(19) Record the adjusted values to the factory adjustment values label when the adjustment values are
changed.
FCX2000-UM-251-9370
Displayed
target force
10 g ± 2 g
48 g ± 4 g
130 g ± 10 g
210 g ± 20 g
515 g ± 10 g
- 1030
No.2 pen pressure
10 10 g ± 2 g
48 48 g ± 4 g
130 130 g ± 10 g
210 210 g ± 20 g
515 515 g ± 10 g
1030 g ± 50 g
9-22
9 ELECTRICAL ADJUSTMENTS