Table of Contents
Advertisement
8
DISASSEMBLY AND ASSEMBLY
How to reinstall the X Motor
(1) Reattach the X motor in the reverse order in which it was detached.
(2) Install the X motor pulley to motor shaft as shown in the picture below.
１ｍｍ
(3) Adjust the X motor belt tension when installing the X motor (Refer to the section 8.4.1.).
(4) Apply a few quantity of the silicon grease to the belt and the tooth of pulley.
FCX2000-UM-251-9370
8-15
Advertisement
Table of Contents
Need help?
Do you have a question about the FCX2000 and is the answer not in the manual?
Questions and answers