GRAPHTEC FCX2000 Service Manual page 198

Error cord No.
E03013
E03014
E03015
E03016
FCX2000-UM-251-9370
LCD Display
A parameter outside of
the permissible range
was specified in the I/O
related command.
Too many parameters
in the I/O related
command.
Framing error, parity
error, or overrun error
has occurred.
Confirm the condition of
RS-232C communication
settings.
Confirm the cable wiring
of RS-232C.
Interface buffer memory
has overflowed.
Confirm the condition of
RS-232C communication
settings.
Confirm the cable wiring
of RS-232C.
10-10
10 TROUBLESHOOTING
Cause
This error will not display if
the application software was
programed correctly.
Confirm this to the vender of
application software.
Set same RS-232C
communication settings on
the PC and plotter.
Use genuine Graphtec RS-
232C cable.
Set same RS-232C
communication settings on
the PC and plotter.
Confirm the handshake
setting for the RS-232C.
Use genuine Graphtec RS-
232C cable.
Solution