Main Specifications - GRAPHTEC FCX4000 Service Manual

1.3

Main Specifications

Configuration
Drive system
Media hold-down method
Effective cutting area
Mountable media (Y-axis)
Maximum cutting speed
Max. acceleration
Specifiable speeds
Max. force
Settable force
Min. character size
Mechanical resolution
Programmable resolution
Distance accuracy
Perpendicularity
Repeatability
Interfaces
Buffer memory
Command sets
Number of cutters/pens
Tool type
Compatible media
Offline output function
Bar code data management function
LCD display
Power supply
Operating environment
Guaranteed precision operating
environment
External dimensions
(W x D x H)
Weight (Approx.)
*1 : HP-GL is a registered trademark of the US Hewlett Packard Company.
*2 : Please use cutter blade CB15U or CB15U-K30.
*3 : Use cutter blade CB15U-K30.
*4 : Use Cutter blade CB15UA.
*5 : It depends on our specified paper and conditions.
*6 : The accuracy read with the pattern prepared for this plotter, using the attached pen and coated (glossy) paper.
FCX4000-UM-251-9370
FCX4000-50ES
Flatbed
Digital servo
Electrostatic adhesion
660 x 488 mm
536 mm
75 cm/sec (Omnidirection)
9.8 m/s (Omnidirection)
2
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75cm/s 23 steps
Max. 5.88N (600gf)
48 steps
About 10 mm alphanumeric characters (depending on the materials and font)
2
0.005 mm
GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL
Distance moved within ±0.2% or less or within ±0.1 mm or less, whichever is larger (Plotter mode)
0.3 mm/430 mm or less (Plotter mode)
0.1 mm or less: Expansion and contraction of the media are excluded (plotter/cutting mode)
USB2.0 (full speed) , RS-232C, Ethernet 10BASE-T / 100BASE-TX
2 MB
GP-GL and HP-GL emulation
TM
2
Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 0.5 mm paper * 2
• Thickness less than 0.8 mm compressed foam sheet *
• Thickness less than 1 mm sandblasting rubber *
• F, G flute
• Clear package sheet
4
• High-intensity reflective film *
USB memory - 64 files
Yes
Graphic type (240 × 128 dot)
100 to 240V AC 50/60Hz
10 to 35˚C, 35 to 75% RH (non-condensing)
16 to +32˚C, 35% to 70% RH (non-condensing)
1089 mm × 897 mm × 204 mm
(Including media stocker)
29 kg
976 x 660 mm
708 mm
mode: 0.025 mm
TM
0.4 mm/610 mm or less (Plotter mode)
3
3
1405 mm × 1069 mm × 204 mm
1405 mm × 1069 mm × 895 mm (with optional stand)
37 kg
53 kg (with optional stand)
1-2
1 INTRODUCTION
FCX4000-60ES